Wi-Fi can be quite inconsistent at times. Standing at one place in your home, you may get the perfect Wi-Fi signal, but just as you move a few steps in one direction, you will see the signal dropping one bar at a time. This predicts the unreliable nature of the Wi-Fi network. It gets you into thinking that there are several factors, which impact the performance of the factors.
Take your router to a more centralized location.
Here is a general rule of thumb that you need to bear in mind – an average wireless router usually has a maximum range of 46 meters indoors and about 92 meters outdoors. Though this may be adequate for an average apartment or home, there are several signal interferences and obstacles, which may degrade the signal before it finds its way to different parts of your home.
The placement of the router has a direct impact on whether or not you receive the best coverage. Quite a lot of it depends on the kind of router you have and its produced signal strength. Please understand that if your router is tucked into your home’s top floor, in the basement, or the corner office, then you may be dealing with greater range and signal strength issues than you need to.
Mia, an EmbraceGardeningrepresentative who wrote post on best fertilizers for citrus trees, says, “To receive the best signal strength, you must place the router in a centralized location in the home.’ In several families, the routers are placed right next to the computer equipment. Even though you can put your router anywhere in the home, bear in mind that the distance is not over 150 meters for the best signal strength.
Pick the router up from your floor
Your Wi-Fi router tends to broadcast the signal in all directions. This includes both horizontally and vertically. Hence if the router is placed on the floor, then a good chunk of the signal is broadcasted to the floor underneath yours. ‘By merely raising the router off the ground, only by a few feet, a lesser signal goes downstairs, and more of it can be enjoyed on your floor,’ advises Stanley, an educator who offers CDR report writing service.
Do not box it in
Wireless routers are not necessarily the most attractive fixtures in your house. It is why many people like to stack them away on shelves or cupboards. It is time you let it out and allow it to enjoy some fresh air. This will provide you with better signal strength.
Try to keep all the interferences at bay.
Other routers are not the only ones to interfere with your Wi-Fi signal. Even electronic appliances, such as microwave ovens, cordless phones too, can intervene with the router’s signal strength. So, it is best recommended to keep all these interfering appliances away from the router.
Point one antenna horizontally and the other one vertically
Suppose your home has multiple devices consuming the Wi-Fi’s signal strength. In that case, there is a probability that some of the devices employ horizontal antennas, while others use vertical antennas. Usually, the Wi-Fi routers have two adjustable antennas, which are easy to manipulate. So, when you point one router antenna horizontally and the other one vertically, then you can avail of maximum signal strength for each of your devices.
Be careful with the frequency
When you have a dual-band router, do ensure that you configure it to ensure optimum performance. It may be the 5Ghz band, instead of the more prevalent 2.4 GHz band. Let us state the obvious, the higher band will provide you with a faster speed, and you will experience less intervention from the other devices and networks. However, please know that the 5GHz band will not be able to handle the obstructions. It will thus be unable to reach as far as the 2.4 GHz signal. Therefore, the choice of the router frequency must be given proper thought.
Bandwidth hoggers
At times, the primary issue is not your Wi-Fi signal strength but your internet connection’s capacity. Streaming a couple of devices or video chatting can make even a strong Wi-Fi signal feeble. To ensure the best experience, you must manage all the bandwidth hoggers and curtail them from robbing all the other hoggers’ bandwidth.
Reset the router regularly
If you see that the wireless strength and signal are degrading every day, you should instantly reset your router. There is a good chance that the signal strength will improve when you reset the router. It also betters connectivity problems. You can utilize the DD-WRT to ensure that the rescheduling happens at a fixed schedule every day.
So, these are the eight most effective ways to boost your Wi-Fi signal strength. Have more to add to the list? Do let us know in the comment section below.
